Escape Simulator Space Walk Walkthrough Solution

In this article Escape Simulator Space Walk Walkthrough Solution. Space walk is the last part of the Adrift in Space escape room in Escape Simulator, where you’re tasked to find a way to escape the room you’re trapped in.

You’ll have to solve a series of puzzles to get the door open, find the fuel tank, and the laser source to get back to the spaceship. Check out the guide below to find out how to escape Space Walk in Adrift in Space.

1. First Keypad

• The first keypad has a message saying, "The keypad still accepts password only in ascending order."
• To access the keypad, simply click on it.
• There are four smeared numbers on the keypad.
• The passcode is a sequence of four numbers in ascending order.
• If you enter 2, 3, 5, or 7, then click the tick.
• Remove the Laser Source by opening the container.

2. E2 Door

.

• The "E2" door can be opened by clicking on the switch adjacent to it.
• Glue the blue wire to the extreme left of the board, and the green wire to the extreme right of the board.
• Glue the red wire next to the blue wire and the yellow wire next to the green wire to complete the connection.
• As a result, the right sequence is "Blue," "Red," "Yellow," and "Green."

3. E1 Door

• The "E1" door can be opened by clicking on the switch adjacent to it.
• You must now connect the wires in a manner identical to that of the "E2" door.
• Glue the blue wire to the extreme left of the board, and the green wire to the extreme right of the board.
• Glue the red wire next to the blue wire and the yellow wire next to the green wire to complete the connection.
• As a result, the right sequence is "Blue," "Red," "Yellow," and "Green."

4. Fuel Tank

• To access the Door Control Unit, click on it.
• To check the status of each tank, click on "Sensors."
• According to the pie graphic, Ix equals 50%, N equals 16.6%, and O equals 33.4 percent.
• The overall weight of the gasoline is 12t.
• Ix = 12 x 50% = 6.
• N = 12 x 16.6% 2.
• O = 12 x 33.4 % 4.
• To access the Fuel Tank Monitor, click on it.
• In "O", "Ix", and "N", respectively, enter "4", "6", and "2".
• Verify the tank's status by clicking "Verify."

5. Red Battery

• Remove the red battery using the Crane Control Unit.
• Discard the red battery.
• The battery's status indicator will be red.
• Collect the red status by clicking on it.

6. Laser

• Take a look at the red status bar and click on the lock to open it.
• Drag and drop the laser source into the laser source holder from your inventory.
• Insert the status indicator into the battery.
• Reinstall the battery in the engine using the Crane Control Unit.

7. Second Keypad

• Unlock the chamber concealed under the second passcode.
• Take the tablet and place it in the compartment.
• Examine the tablet and the area surrounding it.
• A note concerning the second passcode is located on the tablet's rear.
• Enter "1", "5", "3", and "1" into the chamber and collect the pipes.

8. First Hatch

• Select the Door Control Unit and then the "Grid" option.
• Due to the fact that Hatch #3 is locked, you must enter the code to access it.
• To do so, you must consult the tablet.
• To unlock hatch #3, enter "C06" and press "Submit."

9. Second Hatch

• Hatch #1 is also locked, requiring you to enter the code.
• To unlock hatch #1, enter "B04" and click "Submit."

10. Pipes Connection

• Connect E1 and E2 to the operational Fuel Tank Monitor using the pipes. Connecting the pipes to the broken Fuel Tank Monitor is not recommended.
• All floor panels should be opened.
• To make the gasoline operate, you must connect E1 and E2 to a functional fuel tank monitor via the pipes.
• The pipes do not have to be connected to the broken fuel tank monitor.
• Connect the pipes in the manner depicted in the screenshot above.
• Finally, click on the Door Control Unit's switch to exit Space Walk in Adrift in Space

Also Read | Escape Simulator The Library Walkthrough Solution